The South Asia Inscriptions Database
Records: 164

A single copper plate inscribed on both sides. The proper right side (verso) of the plate bulges outward in the middle, where a seal was likely attached.

Materialsmetal, copper alloy
Formplate
Event History
  • Event Type
    Created
    Place
    Baigram
  • Event Type
    Recorded
    Place
    Baigram
    Date
    1930
  • Event Type
    Stored
    Place
    Gauḍa Research Society, Howrah
    Date
    1983
Inscriptions
  1. Single plate, 15 lines on recto and 10 lines on verso.

The ends of the connecting ring are flattened to overlap and secured by a rivet.

Materialsmetal, copper alloy
Formplate
Event History

The band is attached to the seal with the same rivet that secures the overlapping ends of the band. Its dimensions are not reported.

Materialsmetal, copper alloy
Formplate
Event History

The seal is a flat disc. Its surface is entirely blank, bearing neither an emblem nor an inscription. It is attached to the seal band by a rivet. No dimensions other than diameter reported.

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed only on the verso. Its surface is flat, without raised rims. The hole for the connecting ring is on the left-hand side, vertically at the centre, and horizontally 3.2 cm from the edge. The dimensions of the plates in the set vary slightly, but are not reported individually, only as a range.

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed on both sides. Its surface is flat, without raised rims. The hole for the connecting ring is on the left-hand side, vertically at the centre, and horizontally 3.2 cm from the edge. The dimensions of the plates in the set vary slightly, but are not reported individually, only as a range.

Materialsmetal, copper alloy
Formplate
Event History

A plate bearing no inscription. Its surface is flat, without raised rims. The hole for the connecting ring is on the left-hand side, vertically at the centre, and horizontally 3.2 cm from the edge. The dimensions of the plates in the set vary slightly, but are not reported individually, only as a range.

Materialsmetal, copper alloy
Formplate
Event History

A plate bearing no inscription. Its surface is flat, without raised rims. The hole for the connecting ring is on the left-hand side, vertically at the centre, and horizontally 3.2 cm from the edge. The dimensions of the plates in the set vary slightly, but are not reported individually, only as a range.

Materialsmetal, copper alloy
Formplate
Event History

A single plate belonging to a set of probably three, probably including two of %OB00146, %OB00147 and %OB00148. A hole 1.3 cm in diameter, about 5 cm from the centre of the left-hand edge, served for a ring to bind the plate together with its siblings. The ring and the presumably attached seal are lost.

Materialsmetal, copper alloy
Formplate
Event History
  • Event Type
    Stored
    Place
    unknown

Two plates, each inscribed on one face only. Dimensions above are for the first plate; the width of the second is about 1 cm less, but its height is 0.8 cm more. The plates are smooth, without thickening or raising at the rims. They are fairly thick, but some of the writing shows through on their backs. They are very well preserved. Their top margins have a hole (08.

Materialsmetal, copper alloy
Formplate
Event History
  • Event Type
    Created
    Place
    Uccakalpa
  • Event Type
    Recorded
    Place
    Betul
    Date
    1905
  • Event Type
    Stored
Inscriptions
  1. Dimensions estimated from plate size. 14 lines on the first plate, 15 on the second. Well preserved except for a hole around the middle of the last line of the second plate.

This is a 20th-century iron copy of an original set of three copper plates. The first is inscribed only on the inner side, the second and third on both faces (3 verso is only partly filled). No measurements have been reported. They probably have no raised rims.

Materialsmetal, iron
Formplate
Event History
  • Event Type
    Stored
    Place
    Birla Archaeological and Cultural Research Institute, Hyderabad

The ends of the ring are soldered to the seal. The face of the seal is circular, and is inscribed along the circumference. No further details are reported.

Materialsmetal, iron
Formplate
Event History

A Buddhist statue, no further details reported. The inscription is on the pedestal.

Materialsmetal, copper alloy
Formplate
Event History
  • Event Type
    Stored
    Place
    Imperial Museum, Calcutta

A set of seven plates, the first and last inscribed only on the inner sides; the others on both faces. Their surface is flat, without raised rims. The size of the plates differs slightly, but no individual figures are reported. The plates have a hole at the centre of one of the longer sides (top of recto and bottom of verso pages), through which they are connected by a ring.

Materialsmetal, copper alloy
Formplate
Event History
  • Event Type
    Stored
    Place
    British Library

The ends of the connecting ring are flattened (as if to overlap and fasten with a pin or bolt, but they are not pierced). The weight of the ring and seal is 410 grams; the separate figure for the ring is an estimate.

Materialsmetal, copper alloy
Formplate
Event History

The seal is a flat disc, slightly thicker in the centre. It bears no emblem, only the inscription. It is hung separately on the ring by means of a smaller ring soldered to the back of the seal. The weight of the ring and seal is 410 grams; the separate figure for the seal is an estimate.

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed only on the verso. Its surface is flat, without raised rims. There is a hole for the connecting ring at the centre of the bottom margin.

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed on both faces. Its surface is flat, without raised rims. There is a hole for the connecting ring at the centre of one of the longer sides (top of recto and bottom of verso).

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed on both faces. Its surface is flat, without raised rims. There is a hole for the connecting ring at the centre of one of the longer sides (top of recto and bottom of verso).

Materialsmetal, copper alloy
Formplate
Event History

A plate inscribed on both faces. Its surface is flat, without raised rims. There is a hole for the connecting ring at the centre of one of the longer sides (top of recto and bottom of verso).

Materialsmetal, copper alloy
Formplate
Event History